| Depth Rating |
200 Meters Seawater (MSW) - 660 Feet Seawater (FSW) |
| Length |
530 mm - 21 in |
| Width |
245 mm - 9.65 in |
| Height |
254 mm - 10 in |
| Diagonal |
353 mm - 13.9 in |
| Weight in Air |
11 kg - 24.25 lbs |
| Protection |
Protective shell and polyethylene bumper frame |
Thrusters
|
| Thruster configuration |
Four (4) Brushless DC thrusters - Two (2) forward, one (1) vertical and one (1) lateral. Each thruster is identical and isolated |
| Bollard Thrust (forward) |
7 kgf - 15.4 ft/lbs |
| Bollard Thrust (vertical) |
3 kgf - 6.6 ft/lbs |
| Bollard Thrust (lateral) |
3.2 kgf - 7 ft/lbs |
| Speed at surface |
3 knots - 3.45 mph - 1.54 m/s |
| Max Operating Current |
2 knots |
Cameras & Lighting
|
| Camera Tilt |
180 degrees - internal chassis rotates |
| Range of View |
270 degrees - 180 degrees from tilt, 90 degrees from camera lens |
| Camera - Primary |
570 line Ex-View HAD color - 0.2 Lux |
| Camera - Secondary |
430 line B/W - 0.03 Lux |
| Focus |
Manual focus control via hand controller. 90mm to infinity |
| Video Format |
NTSC or PAL |
| Output Signal |
Composite |
| Transmission Type |
Fiber Optic |
| Internal Lighting |
700 Lumen LED array tracking camera. Variable intensity via hand controller. |
Control System
|
| Configuration |
Hand controller, monitor and surface power supply built into protective case |
| Data Channels |
1 RS-232 for LBV controls and one spare 115K |
| Monitor |
38 cm - 15 in color LCD behind waterproof panel |
| Sunshade |
Crush texture cover for LCD monitor |
| Sensors |
Heading, depth, temperature |
| Auto Functions |
Depth, heading, trim |
|
Hand Controller |
|
| Length |
210 mm - 8.3 in |
| Width |
160 mm - 6.3 in |
| Height |
75 mm - 3 in |
| Weight |
650 grams - 1.4 lbs |
| Joystick |
Single - forward, reverse, rotate left, rotate right, roll left, roll right |
| Joystick Steps |
32 |
| Vertical Thruster |
Proportional control knob |
| Additional Controls |
Membrane keypad - thruster gain control, trim, auto depth, auto heading, camera tilt, camera focus, camera switch, light On/Off, light intensity, accessories, video overlay position, power On/Off, programming keypad |
| Safety |
I.P. 64 - splash proof |
|
Integrated Control Console
|
| Length |
452 mm - 17.8 in |
| Width |
328 mm - 12.9 in |
| Height |
173 mm - 6.8 in |
| Weight |
16 kg - 35.3 lbs |
| Input Voltage |
100-130 VAC or 200-240 VAC |
| Power Requirement |
1,000 Watts maximum |
| Safety |
Isolated input power, circuit breaker, line insulation monitor, leak detector. Meets and exceeds "Code of Practice for the Safe Use of Electricity in Water" |
| Water Proofing |
I.P. 64 - Splash proof |
Umbilical
|
| Diameter |
8 mm - 0.3 in nominal |
| Length |
250 meters - 820 feet |
| Working Strength |
45 kgf - 100 lbs |
| Breaking Strength |
318 kgf - 700 lbs |
| Strength Member |
Kevlar |
| Buoyancy |
Neutral in fresh water - slightly positive in Seawater |
| Conductors |
Twisted pair with shield and a multi-mode fiber |
Reel
|
| Length |
372 mm - 14.6 in |
| Width |
368 mm - 14.5 in |
| Height |
419 mm - 16.5 in |
| Weight |
20 kg - 44 lbs (with umbilical) |
| Construction |
Polyethylene starboard, stainless steel and aluminum |
On-Screen Information Display
|
| Information Displayed |
Thruster gain settings, light level, Trim On/Off, heading, depth, turns counter, camera angle, water temperature, time, date, user text |
| User Text |
Up to 28 characters |
| Positioning |
Bottom, top or off |
| Menus |
Quick menu, setup, calibrate, diagnostics, options |
|
Transit Cases
|
| Case - 1 |
|
| Length |
762 mm - 30 in |
| Width |
516 mm - 20.3 in |
| Height |
452 mm - 17.8 in |
| Weight |
27 kg - 60 lbs |
| Contents |
LBV with options if fitted and spares kit |
| Case - 2 |
|
| Length |
762 mm - 30 in |
| Width |
516 mm - 20.3 in |
| Height |
452 mm - 17.8 in |
| Weight |
33 kg - 73 lbs |
| Contents |
Umbilical on reel, spare thruster, manuals and vacuum pump. |
|
Spares, Tools and Manuals
|
| Spares Contents |
Fastener kit, seal kit, propellers, gel lube, Kluber grease, acrylic polish, fuse |
| Tool Contents |
1.5, 2, 3, 4, 5 mm hex ball drivers, #1, #2 Phillips screw drivers, 10 mm socket driver, small straight blade screwdriver, 11/16 socket, 19 mm open end, O-ring insertion tool, vacuum pump |
| Spare Thruster |
Brushless DC thruster assembly |
| Manuals |
Operators manual, service and repair CD-ROM |
